Table Tennis Robot for Training with 40mm+ Balls

About this item

• Suz S201 is designed to work properly when at least 20 balls are available below the feeding tube. If the machine does not serve properly, make sure that there are enough balls around the feeding tube and the ball frequency on the control box is at least 1.Make sure enough balls around the feeding tube,Tighten the net a little, let the tilt rise a little, so the balls will came to the feeding tude
• Adjust robot head up and down, you can play direct serve or indirect serve. how to adjust robot head up and down can send us message for video. If you would like to play direct serve (i.e., the served ball bounces one time on the table before you hit the ball), set topspin to 6 and backspin to 2 or 3 on the control box. If you would like to play indirect serve (i.e., the served ball bounces two times on the table before you hit the ball), set topspin to 4 and backspin to 3 on the control box
• Read the manual for instructions on how to install the robot.How to install power cord, put in power cord behind the control box.(not the back of the machine,put in power cord behind the control box )
• Can only be placed on table tennis tables less than 2.5 inches thick. if table tennis table is more than 2.5 inches thick is not suitable for our robot
• The manufacturer will provide replacement parts for any damage caused by normal wear and tear within one year from the purchase of Suz table tennis robots. If you need any help, please email the manufacturer. The manufacturer's email address can be found in the manual
• If you don’t use the robot for a long time, please clean it up and put robot in box or bag to avoid collecting dust